



Sennheiser E608 Supercardioid Mini Clip-on Mic for Woodwind / Brass / Drums
A solid choice for brass and woodwind players. With its flexible gooseneck, the e 608 snuggles right up to the instrument, while the multifunctional clip lets it find an optimal position on every instrument. The shock-mounted capsule reliably protects against structure-borne noise. When something is in the air – it doesn't get lost here. The e 608 comes closer to the heart of each instrument and transmits its character in soft, warm tones.
The E 608 is a super-cardioid microphone ideal for almost invisible clip-miking of woodwind (except certain Flutes), brass and drums. A newly developed clamp and gooseneck mounting enables the capsule to be positioned close to the signal source for high realism and high-level output.
Sennheiser E608 Supercardioid Mini Clip-on Mic for Woodwind / Brass / Drums
A solid choice for brass and woodwind players. With its flexible gooseneck, the e 608 snuggles right up to the instrument, while the multifunctional clip lets it find an optimal position on every instrument. The shock-mounted capsule reliably protects against structure-borne noise. When something is in the air – it doesn't get lost here. The e 608 comes closer to the heart of each instrument and transmits its character in soft, warm tones.
The E 608 is a super-cardioid microphone ideal for almost invisible clip-miking of woodwind (except certain Flutes), brass and drums. A newly developed clamp and gooseneck mounting enables the capsule to be positioned close to the signal source for high realism and high-level output.
Rugged reinforced glass-fibre body
Shock-mounted capsule
Hum compensating coil
Extremely robust connection cable with XLR connector
Shock-mounted capsule provides low sensitivity to impact and handling noise
Lightweight and discreet
General
Transducer principle (Microphone): dynamic
Pick-up pattern: super-cardioid
Frequency response (microphone): 40.....16000 Hz
Sensitivity in free field, no load (1kHz): 0.8 mV/Pa
Nominal impedance: 250 Ohm
Min. terminating impedance: 1000 Ohm
Physical & Dimensions
Connector: XLR-3
Dimensions: d 17 x 185 mm
Weight w/o cable: 20 g